Sump Pumps, Basins, & Accessories
Basin |Lids | Sump Cover Drains | Sump Pumps | Backup Pump Systems | Check Valve
![]() |
Sump Pump BasinItem #SPB002 Member's Best Price: Our durable, structural foam basins are made of rugged polyethylene. Injection molds ensures uniform thickness and consistent quality. The basin has a 20 gallon capacity. View Specs (PDF) |
![]() ![]() |
Split Cover LidItem #SPC003 Member's Best Price: The structural foam split cover is 5/8" in thickness with a diameter of 20 1/2". The reinforced ribs enhance the structural integrity of the split cover sump pump lid. |
![]() ![]() |
Gas-Tight LidItem #SPC003 Member's Best Price: The structural foam gas-tight cover is 5/8" in thickness with a diameter of 20 1/2". The reinforced ribs enhance the structural integrity of the gas-tight cover sump pump lid. |
![]() |
Sump Cover Drain SealItem #SPJS-5 Member's Best Price: The SPJS-5 Sump Cover Drain Seal has a plastic ball valve. The cover plate is 5" in diameter. The drain hole is 1 1/3" in diameter. The below grade depth is 4 1/2" and the below grade width is 4 2/5". |
![]() |
Sump Cover Drain SealItem #SPFS-2 Member's Best Price: The SPFS-2 Sump Cover Drain Seal has a brass valve and is rated to stay closed up to a pressure differential of about 1.25" WC. To ensure a sump pump is sealed from gases, odors, and radon, we recommend installing the SPFS-2. The top of the drain is 2 3/4" in diameter and has a below grade depth of 3 3/4". |
![]() |
Zoeller® 1/3 HP Sump PumpItem #SPZ053 Member's Best Price: 115 Volt or 230 Volt / 1 Phase / .3 HP Non-clogging engineered plastic vortex impeller design. 1-1/2" NPT Discharge. Able to pass 1/2" solid spheres. Float operated, submersible (NEMA 6) 2 pole mechanical switch. Automatic Reset thermal overload protected. Stainless Steel screws, guard, handle and switch arm assembly. Watertight neoprene square ring between motor and pump housing. Cast switch case, motor and pump housing with powder coated epoxy finish. |
![]() |
Zoeller® 1/2 HP Sump PumpItem #SPZ098 Member's Best Price: 115 Volt or 230 Volt / 1 Phase / 1/2 HP / 60 Hz / 1725 RPM Non-clogging engineered plastic vortex impeller design. 1-1/2" NPT Discharge. Able to pass 1/2" solid spheres. Float operated, submersible (NEMA 6) 2 pole mechanical switch. Automatic Reset thermal overload protected. Stainless Steel screws, guard, handle and switch arm assembly. Watertight neoprene square ring between motor and pump housing. Cast Iron construction with powder coated epoxy finish. |
![]() |
Zoeller 507 Battery Backup PumpItem #SPZ507 Member's Best Price: Zoeller Backup Pump provides extra protection when the primary AC pump fails due to storms, brownouts, when primary pump fails to keep up with excessive water due to rain or overloading and when the primary pump fails due to damage, mechanical malfunction or obstructions in the pit. Features include 10 amp battery charger without burnout and battery overcharge protection. The pump is a 12 volt highly efficient with noncorrosive pump construction. The 12 volt DC control box is automatic with complete light, alarm indicators and warning system. Control device is a variable level reliable float switch. The pump contains an internal check valve in the discharge and includes an additional heavy duty check valve adaptable to 1-¼” or 1-½” pipe. |
![]() |
Job Ready Super Simple Sump SolutionItem #SPW006 Member's Best Price: There is a 3 year manufacture's warranty on the 1/3 HP pump system. The Primary Pump is capable of 58 gallons per minute with a discharge head of 5 ft. The Backup Pump is capable of 47 GPM with a discharge head of 5 ft. Cap switch technology is an innovative breakthrough, providing the most reliable switch on the market today. Lasts 5 times longer than standard switches! No adjustment needed! The heavy duty check valves are already installed, making this a quick and easy installation. The Job Ready Super Sump Solution is microprocessor controlled - no moving parts to wear out and no adjustment needed! |
1/2" FLO Check ValveItem #SPV005 Member's Best Price: The 1/2" FLO Check Valves are quick and easy to install free-hand. There are no hose clamps used with this product. |












