Water X-Tract™ System

Most wet basement problems are caused by water collecting around the foundation and creating hydrostatic pressure. The pressure forces water through the cold joint where the wall and floor meet, and even through the cracks and pores in the concrete block walls. The Water X-Tract™ System solves those problems by doing what paints, plugs, and sealers can't do. It collects the water and quietly drains it away to your sump pump, instead of trying to plug up the water problem, which never works.
Item #XT4444
156ft per carton
6'6" main sections
Member's Best Price:
$1.52 per ft
Roll mouse over image to the left for animation. Water X-Tract™ System relieves hydrostatic pressure without jackhammers trenching through a basement floor or having to haul mud and gravel in and out of your clients home. Pressure is relieved in the walls by drilling holes into the concrete block cavities at floor level. The X-Tract's™ hollow baseboard design is then installed along the perimeter of the basement walls and sealed to the floor with our Pro-SealOnce™ Adhesive.
Roll mouse over image to the right for animation. Hollow baseboards adhere to the floor along the wall acting as a barrier. The system collects water from the weep holes tapped into the blocks where the floor and wall meet. The water travels along the hollow baseboards to a sump pump leaving your customer's basement clean and dry.
The X-Tract™ System is ideal for poured wall or block wall foundations. This system is not submerged in soil that can plug sub-floor systems.
![]() XT4444 6'6" Main Section |
XT1114 End Cap |
XT2224 Butt-Joint |
![]() XT5554 Inside Corner |
XT8884 Outside Corner |
XT3334 Pro-SealOnce |



